Business demand charges explained: kVA, 30-minute peaks, and what solar does
Many business bills have a charge that has nothing to do with how much power you use, and everything to do with your busiest half-hour. It changes what solar saves.
A demand charge bills a business for its peak demand, usually in kVA, measured as the highest 30-minute average. Energex bills it monthly on that month's single peak; Powercor bills on a rolling 12-month maximum kVA, so one bad half-hour can cost you for a year. Solar cuts the energy part of a bill, but often not the demand part, because peaks frequently happen when the sun is low or behind cloud.
How it is measured
Energex says most demand-tariff customers are billed in kVA rather than kW, and that kVA also reflects the extra power a site draws if its power factor is poor[1]. The charge is $ per kVA per month, based on the maximum kVA measured as a single peak over a 30-minute period[1].
Some networks use a longer memory: Powercor applies $ per kVA per month times the rolling 12-month maximum kVA[2], so a single spike sets the charge for a year.
Who pays one
It depends on the network and your size. In Victoria, customers using under 160MWh a year can opt out of a demand charge[3]. In South Australia, medium businesses using 40 to 160MWh a year default to a demand tariff, with an opt-out if their demand is under 120kVA[4]. Check the network tariff code on your bill.
Why solar alone often doesn't cut it
Solar reduces the energy you buy. A demand charge is set by the single highest half-hour, which often falls in the late afternoon, on a cloudy day, or in winter, when solar output is low. If the peak isn't reliably during strong sun, the demand charge barely moves. That is the case for a business battery, or simply for moving big loads apart.
What to look at
- Your tariff code and whether there is a kW or kVA demand line on the bill.
- Whether it is monthly or a rolling 12-month maximum.
- When the peak happens: interval data shows it. See what to send for an assessment.
Get your business site assessed, by email
Commercial solar depends on your roof, your tariff, your load profile and your network, so every site is looked at individually. There is no online calculator for this, on purpose.
- 12 months of electricity bills, or your smart meter interval data (NEM12)
- The site address and what the business does
- Roof type and a few photos, if you have them
Or email olly@aussiesolarinfo.com with the subject "Commercial solar enquiry".
No installer pays to appear on this site. Nothing reaches an installer unless you ask.
Common questions
What is a demand charge on a business electricity bill?
A charge based on your highest 30-minute demand in the billing period, usually in kVA, on top of the charge for energy used.
Does solar reduce demand charges?
Often not by much, because the peak half-hour frequently falls when solar output is low. A battery or load shifting usually does more.
What is a rolling 12-month maximum demand?
On networks like Powercor, the demand charge is based on your highest kVA in the last 12 months, so one spike sets the charge for a year.
Sources
- Energex, Business electricity tariffs. Read 2026-11-15. (read through a search engine's copy of the page, because the site refuses automated reading)
- Powercor, 2025-26 pricing. Read 2026-11-15. (read through a search engine's copy of the page)
- CitiPower, Tariff structure statement explanatory document 2021-2026. Read 2026-11-15. (read through a search engine's copy of the page)
- SA Power Networks, AER draft decision, tariff structure statement 2025-30. Read 2026-11-15. (read through a search engine's copy of the page)