Free independent solar ROI check, Australia-wide Check my home →

AC or DC coupled battery: which fits the solar you already have?

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

Every battery quote is one of two designs, even if it doesn't say so. Which one makes sense depends mostly on the inverter you already have.

Short answer

A DC-coupled battery shares a hybrid inverter with the panels, which is efficient and neat but usually means replacing a solar-only inverter. An AC-coupled battery has its own inverter and connects at the switchboard, so it works alongside the inverter you already have, at the cost of a second conversion. For existing solar with a working solar-only inverter, AC coupling is usually simpler; for a new system, or an inverter due for replacement, DC coupling usually makes more sense.

DC coupled

The battery sits on the DC side of a hybrid inverter, which handles both the panels and the battery. Examples on this site: a Sungrow SBR on an SH hybrid, a BYD on a Fronius GEN24 Plus. Efficient, one inverter, one app. On an existing system it means the solar inverter must already be a hybrid, or be replaced.

AC coupled

The battery has its own inverter and connects to the switchboard, so the existing solar inverter keeps doing what it does. Fox ESS describes it as especially practical for retrofits where you want storage without replacing a working system[1], and notes it needs a separate battery inverter, adds conversion losses, and may need extra metering or backup equipment[2]. Examples: SMA's Sunny Boy Storage, GoodWe's SBP, Fox ESS's AC1, and batteries with their own inverter such as the Tesla Powerwall.

Which suits your inverter

Your existing inverterUsual routeGuide
Fronius GEN24 Plus or Symo HybridDC coupledFronius
Older Fronius Primo or SymoAC coupled, or replace with a GEN24Fronius
Sungrow SGAdd an SH hybrid alongsideSungrow
SolarEdgeSolarEdge Home Battery, or AC coupledSolarEdge
EnphaseEnphase IQ Battery (AC coupled by design)Enphase
SMA Sunny BoySunny Boy Storage (AC coupled)SMA
GoodWe, Growatt, Huawei, Solis, Fox ESS, SofarDepends on the modelGoodWe · Growatt · Huawei · Solis · Fox ESS · Sofar

What it costs

On this site's calculator, a value-tier 10kWh battery is $7,650 to $13,500 installed, and a premium battery priced at 15kWh is $13,914 to $20,700, before the federal discount[3]. A quote that replaces a working inverter to go DC coupled should show the inverter as its own line, so you can compare it with an AC-coupled quote that keeps it.

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

What is the difference between AC and DC coupled batteries?

A DC-coupled battery shares a hybrid inverter with the panels. An AC-coupled battery has its own inverter and connects at the switchboard, alongside the existing solar inverter.

Which is better for existing solar?

If the existing inverter is solar-only and working, AC coupling usually avoids replacing it. If it is already a hybrid, or due for replacement, DC coupling usually makes more sense.

Is AC coupling less efficient?

It adds a conversion step, so it loses a little more energy, and may need extra metering or backup equipment.

Sources

  1. Fox ESS, AC coupling vs DC coupling. Read 2026-11-13. (read through a search engine's copy of the page)
  2. Fox ESS, AC-coupled vs DC-coupled: the best way to add battery storage. Read 2026-11-13. (read through a search engine's copy of the page)
  3. Aussie Solar Info calculator (how it works), installed battery ranges and rebates as of 2026-11-13.