Free independent solar ROI check, Australia-wide Check my home →

Adding a battery to a Enphase system: your options

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

Enphase systems use microinverters on each panel, so adding a battery works differently from a string inverter. Here is what Enphase's own documents say.

Short answer

Enphase's IQ Battery 5P works with Enphase IQ Series and S Series microinverters, so most Enphase systems can take one, including older IQ7 systems. It needs the IQ System Controller 3 INT for both normal and backup operation, and an installer with Enphase's storage certification.

Step one: check the label

Enphase's Australian datasheet says the IQ Battery 5P is compatible with IQ Series and S Series microinverters, and needs the IQ System Controller 3 INT for grid-tied and backup operation[1]. Enphase describes IQ7 systems as compatible with its IQ Batteries[2]. The model is printed on the microinverters and in the Enphase app.

What the install involves

In Australia, installers need Enphase's storage installation certification to install and commission the IQ Battery 5P[3]. The standard IQ Battery 5P and the newer FlexPhase version are not yet supported in the same system[2]. Each 5P is 5kWh usable, so a 10kWh battery is two units[1].

Backup and IQ8

With IQ8 microinverters, the system can restart from sunlight alone after a long outage; with IQ7, it relies on the battery's own charge. See Enphase warranty and backup for how each works.

What it costs

BatteryInstalled, before rebatesAfter the federal discount (NSW, VIC, QLD)
Value tier, 10kWh$7,650 to $13,500$5,130 to $10,980
Premium tier, 10kWh$8,797 to $15,524$6,277 to $13,004

This site's calculator ranges, not a quote[4]. On this site's recommender, an existing Enphase system brings up Enphase first and Tesla Powerwall second. A new or added inverter is extra and should be its own line. In WA, Synergy customers get up to $1,300 more off. The federal discount falls from 6.8 to 5.7 certificates per kWh from January 2027.

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

Can I add a battery to my Enphase system?

Usually yes. Enphase's IQ Battery 5P works with IQ Series and S Series microinverters, and needs the IQ System Controller 3 INT.

Does the Enphase battery work with IQ7 microinverters?

Enphase describes IQ7 systems as compatible with its IQ Batteries. Restarting from sunlight alone after a long outage needs IQ8.

How many Enphase batteries make 10kWh?

Two IQ Battery 5P units, at 5kWh usable each.

Sources

  1. Enphase, IQ Battery 5P datasheet (Australia and New Zealand). Read 2026-11-13. (read through a search engine's copy of the page)
  2. Enphase, Storage for IQ Series microinverters. Read 2026-11-13. (read through a search engine's copy of the page)
  3. Enphase, IQ Battery 5P installer questions answered. Read 2026-11-13. (read through a search engine's copy of the page)
  4. Aussie Solar Info calculator (how it works), installed battery ranges and rebates as of 2026-11-13.