Free independent solar ROI check, Australia-wide Check my home →

Adding a battery to a Huawei inverter: your options

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

Huawei's SUN2000 inverters were built with batteries in mind, but which battery works depends on the exact model and firmware.

Short answer

Huawei Australia's compatibility statement lists the LUNA2000-5, 10 and 15-S0 batteries as compatible with the SUN2000-2 to 6KTL-L1 single-phase and SUN2000-5 to 10KTL-M1 three-phase inverters. Huawei's newer LUNA2000-S1 needs an M1 inverter on updated firmware. Check the exact model on your label.

Step one: check the label

Huawei's Australian compatibility statement lists the LUNA2000-5/10/15-S0 as compatible with the SUN2000-2/3/4/4.6/5/6KTL-L1 and SUN2000-5/6/8/10KTL-M1[1]. One of Huawei's Australian manuals notes that the SUN2000-8KTL-M1 and 10KTL-M1 are not applicable to Australia[2], so confirm your model is an Australian one.

The newer LUNA2000-S1

Huawei's LUNA2000-S1 manual says a SUN2000-(3KTL-10KTL)-M1 must be upgraded to firmware SUN2000MA V100R001C00SPC161 or later to work with it[3]. Ask the installer to check your firmware before quoting the S1.

What it costs

BatteryInstalled, before rebatesAfter the federal discount (NSW, VIC, QLD)
Value tier, 10kWh$7,650 to $13,500$5,130 to $10,980
Premium tier, 10kWh$8,797 to $15,524$6,277 to $13,004

This site's calculator ranges, not a quote[4]. On this site's recommender, an unknown or non-matching inverter brings up batteries with their own inverter, such as Alpha ESS, Tesla Powerwall and Sigenergy. A new or added inverter is extra and should be its own line. In WA, Synergy customers get up to $1,300 more off. The federal discount falls from 6.8 to 5.7 certificates per kWh from January 2027.

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

Can I add a battery to my Huawei inverter?

Huawei Australia lists the LUNA2000-5/10/15-S0 as compatible with the SUN2000-2 to 6KTL-L1 and SUN2000-5 to 10KTL-M1.

Does the LUNA2000-S1 work with my M1 inverter?

Huawei says the M1 must be on firmware SUN2000MA V100R001C00SPC161 or later.

Sources

  1. Huawei, Inverter and battery compatibility statement (Australia). Read 2026-11-13. (read through a search engine's copy of the page)
  2. Huawei, SUN2000-(3KTL-10KTL)-M1 user manual (Australia). Read 2026-11-13. (read through a search engine's copy of the page)
  3. Huawei, LUNA2000-S1 user manual (September 2025). Read 2026-11-13. (read through a search engine's copy of the page)
  4. Aussie Solar Info calculator (how it works), installed battery ranges and rebates as of 2026-11-13.