Free independent solar ROI check, Australia-wide Check my home →

Essential Energy's flexible export limits: what changes from 23 November 2026

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

If you are getting solar or adding a battery anywhere on Essential Energy's network in NSW, the export rules change on 23 November 2026. Here is what a flexible limit is, what you need to get one, and when a fixed limit still makes sense.

Short answer

From 23 November 2026, new and upgraded solar and battery systems on Essential Energy's network can choose a flexible export limit instead of a fixed one. A flexible limit moves through the day with the network, between 1.5kW and either 5kW or 10kW per phase. It needs a compatible inverter, a reliable internet connection and a system that is backstop-enabled. It is optional.

What changes on 23 November

Until now, solar on Essential Energy's network has generally had a fixed export limit, typically 5kW for single-phase and three-phase systems, and lower in some areas[2]. From 23 November 2026, customers with backstop-enabled systems can choose flexible export limits instead[1]. Applications lodged before that date stay on the existing fixed-limit process[1].

The offer covers new and upgraded systems up to 200kW in NSW, and it is not mandatory[1]. If your bill names Essential Energy as your distributor, this applies to you.

How a flexible limit works

Instead of one number that never moves, the network sends your inverter a limit over the internet that rises when there is room on the local network and falls when there is not[3]. Your installer picks one of two ranges: 1.5kW to 5kW per phase, or 1.5kW to 10kW per phase. The lower range is used where voltage rise calculations show the line cannot take more than 5kW per phase[1].

Two fallbacks are worth knowing. If your inverter brand is not yet supported on Essential's system, you get a fixed 1.5kW limit until the maker is onboarded. If your system loses its internet connection, it drops to a fixed 1.5kW until the connection is back[1].

What you need

That makes the inverter model one of the most important lines on any quote for an install after 23 November. Ask for it by name and ask the installer to confirm it is supported for flexible exports on Essential's network.

Flexible or fixed?

For most homes with a decent-sized system, flexible. A flexible limit lets more of a sunny afternoon's surplus out most of the time, and only holds it back when the local network is full. The trade-off is that it depends on the internet, and on your inverter staying supported.

If you use most of your solar yourself, or have a battery big enough to soak up the afternoon, the export limit matters less either way. In NSW exports earn little: this site's calculator uses about 3.4c a unit for exports against about 30c for power you buy[4]. Every unit you store and use yourself is worth several times a unit you export, which is the basic case for a battery whatever your limit is.

I already have solar on Essential's network

Flexible limits apply to new and upgraded systems. Adding a battery or replacing your inverter counts as an upgrade. Essential suggests asking your solar retailer or installer whether your system supports flexible exports and what, if anything, would need upgrading[3].

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

When do flexible export limits start on Essential Energy's network?

From 23 November 2026, for new and upgraded backstop-enabled systems up to 200kW in NSW. Applications lodged before then stay on fixed limits.

What is the flexible export range on Essential Energy's network?

Between 1.5kW and either 5kW or 10kW per phase. The installer chooses the range, and the lower one applies where the local network cannot take more than 5kW per phase.

What happens if my internet drops out?

Your system falls back to a fixed 1.5kW export limit until the connection is restored. The same 1.5kW limit applies if your inverter brand is not yet supported.

Do I have to choose flexible exports?

No. Essential Energy says flexible export limits are not mandatory.

Sources

  1. Essential Energy, Emergency Backstop Mechanism and CER Installer Portal. Read 2026-11-13. (read through a search engine's copy of the page, because Essential Energy's site refuses automated reading)
  2. Essential Energy, Solar and other Small Generators. Read 2026-11-13. (read through a search engine's copy of the page, because Essential Energy's site refuses automated reading)
  3. Essential Energy, Flexible export limits fact sheet. Read 2026-11-13. (read through a search engine's copy of the page, because Essential Energy's site refuses automated reading)
  4. Aussie Solar Info calculator (how it works), installed battery ranges and rebates as of 2026-11-13.