Free independent solar ROI check, Australia-wide Check my home →

Fronius inverter state codes: what the common ones mean, and when to call someone

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

A Fronius inverter shows a state code when something interrupts normal operation. Most are harmless, and some appear every single day. Here is how to read the common ones.

Short answer

Most Fronius state codes are not faults. State 306 (power low) and 307 (DC low) appear every morning and evening because there isn't enough sunlight yet, and Fronius says they are normal at those times. Codes in the 100s and 500s, such as 102 and 567, are usually about grid voltage being too high, and clear by themselves. Call your installer if a code keeps recurring, or if 306 shows in strong sunlight.

The codes you will see every day

State 306 (power low) and state 307 (DC low) appear naturally every morning and evening because of low sunlight, and are not the result of a fault[1]. The inverter waits and restarts by itself. If 306 appears in strong sunlight, Fronius says to contact your system installer[2].

Grid voltage codes

State 102 (AC voltage too high): the inverter tests the grid and resumes feeding power once voltage is back in range; Fronius says to check the grid connections and contact your installer if it keeps recurring[2].

State 567: grid voltage is excessively high, so the inverter reduces its output, and the fault clears automatically when voltage is back in range[3].

Both are about the grid at your street, not your panels. A recurring 102 or 567 is worth raising with your installer, who can ask the network to check local voltage.

What to do with any code

If your Fronius is getting old

Thinking about a battery? Whether your Fronius can take one depends on the model: see adding a battery to a Fronius inverter. If the system has stopped producing altogether, start with the solar not producing checklist.

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

What does Fronius state 306 mean?

Power low: not enough sunlight to feed the grid. Fronius says it is normal in the morning and evening; if it appears in strong sunlight, contact your installer.

What does Fronius state 102 mean?

AC voltage too high. The inverter waits for the grid voltage to return to range and resumes. If it keeps recurring, contact your installer.

What does Fronius state 567 mean?

Grid voltage is excessively high, so the inverter reduces its output. It clears automatically when voltage is back in range.

Sources

  1. Fronius, Help with Fronius SnapINverters: state codes. Read 2026-11-13. (read through a search engine's copy of the page)
  2. Fronius, Fronius Primo 3.0-1 to 8.2-1 operating instructions. Read 2026-11-13. (read through a search engine's copy of the page)
  3. Fronius, Fronius Energy Package operating instructions. Read 2026-11-13. (read through a search engine's copy of the page)