Free independent solar ROI check, Australia-wide Check my home →

Solar not producing? A safe checklist before you call anyone

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

If your solar app shows zero, or your bill jumps, the cause is often simple and can be checked from the ground. Here is what to look at, in order, and where to stop.

Short answer

Start at the inverter display or app: most faults show a code there. Then check the solar circuit breaker at the switchboard, and whether your inverter model is on a recall list. Don't go on the roof and don't open the inverter. If there's a code you can't clear, or the system is still down after the checks, call your installer or a licensed electrician.

1. Read the inverter

Look at the inverter display or app for a recorded fault[1]. A code tells your installer most of what they need. See what the common codes mean for Fronius and Sungrow.

2. Check the switchboard

A tripped solar breaker at the switchboard stops the inverter. Check that access to the isolator switches hasn't been blocked[1], and that the shutdown instructions are clearly posted next to them[1].

3. Check for a recall

The Clean Energy Council lists recalls for some inverter models; for those, check your product's serial number and shut the inverter down as instructed[2].

If you need to switch it off

Follow the shutdown labels on your own system. The Clean Energy Council's example order is: AC supply at the switchboard first, then the AC isolator at the inverter, then the PV array DC isolator at the inverter[1]. Stay away from the rooftop isolator: over time weather can let moisture into a DC isolator, which can be a fire risk[3].

When to call someone

Call your installer or a licensed electrician if a code won't clear or the system stays down. Energy Safe Victoria recommends servicing a solar system at least once every two years[3].

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

Why is my solar not producing?

Common causes are a fault shown on the inverter, a tripped breaker at the switchboard, or grid voltage issues. Check the inverter display or app first.

Can I reset my solar system myself?

You can follow the shutdown and restart order on your system's labels. Don't open the inverter or go on the roof.

How often should solar be serviced?

Energy Safe Victoria recommends at least once every two years.

Sources

  1. Clean Energy Council, Buying solar: advice for purchasing (consumer guide). Read 2026-11-13. (read through a search engine's copy of the page)
  2. Clean Energy Council, Product recalls. Read 2026-11-13. (read through a search engine's copy of the page)
  3. Energy Safe Victoria, Keeping your home solar safe. Read 2026-11-13. (read through a search engine's copy of the page)