Free independent solar ROI check, Australia-wide Check my home →

Sigenergy battery warranty and blackout backup: what you are actually covered for

Aussie Solar Info · Checked against the sources listed below, 2026-11-13

Two questions decide whether a Sigenergy battery is worth its price after the numbers: what the warranty actually promises, and what happens when the power goes out. Here are both, from Sigenergy's own Australian documents.

Short answer

Sigenergy's current Australian factory warranty covers the battery and energy controller for 10 years, with the battery keeping at least 70% of usable energy for 10 years or until a throughput limit. It depends on the system staying online. With the Sigen Energy Gateway, Sigenergy advertises whole-home backup with a 0ms switchover, measured under its own test conditions.

The warranty

Sigenergy's Australian factory warranty, dated April 2026, covers the battery and energy controller for 10 years, and says the battery keeps at least 70% of its usable energy for 10 years or until a throughput limit is reached, whichever comes first[1]. Cover depends on the system staying connected to the internet for updates: after more than 90 days offline the unit goes into a safe operation mode[1].

Sigenergy also sells an extended warranty that adds up to 5 years, for a maximum of 15. It has to be bought and activated within 12 months of installation[2]. If a quote mentions 15 years, ask whether the extension is included in the price.

In a blackout

Backup is done by the Sigen Energy Gateway. Sigenergy's Australian pages advertise full-home backup with a 0ms switchover[3]. Its datasheet explains what that means: 0ms is the disruption on the load side, measured with the Gateway, Sigen energy controller and Sigen battery together, where the controller's rated power is higher than the backup loads[3]. In plain terms, it holds if your backed-up loads are within what the system can supply.

Two things to ask for with the quote

What a Sigenergy battery costs

On this site's calculator, a Sigenergy battery at 10kWh is $8,797 to $15,524 installed before the federal discount, and $6,277 to $13,004 after it, in NSW, Victoria and Queensland[4]. Quote checks by size: 10kWh · 15kWh · 27kWh · 40kWh. For brand comparisons, see Sigenergy battery prices in Australia.

Get your own numbers

Two minutes of questions gets you your system size, what it should cost after rebates in your state, and what it saves, built on your roof and your usage. No installer sees anything unless you ask.

Run my numbers, free

No installer buys placement or ranking here, and nothing reaches an installer unless you ask.

Common questions

What is the Sigenergy battery warranty?

10 years on the battery and energy controller under Sigenergy's April 2026 Australian terms, with at least 70% of usable energy retained for 10 years or until a throughput limit. An extended warranty can take it to 15 years.

Does Sigenergy work in a blackout?

With the Sigen Energy Gateway, yes. Sigenergy advertises whole-home backup with a 0ms load-side switchover, measured when the backup loads are within the system's rated power.

What does a Sigenergy battery cost?

On this site's calculator, $8,797 to $15,524 at 10kWh installed before the federal discount, and $6,277 to $13,004 after it, in NSW, Victoria and Queensland.

Sources

  1. Sigenergy, Factory warranty (Australia, April 2026). Read 2026-11-13. (read through a search engine's copy of the page)
  2. Sigenergy, Battery storage and solar inverter warranty. Read 2026-11-13. (read through a search engine's copy of the page)
  3. Sigenergy, Sigen Energy Gateway datasheet. Read 2026-11-13. (read through a search engine's copy of the page)
  4. Aussie Solar Info calculator (how it works), installed battery ranges and rebates as of 2026-11-13.